Hope this helps. And so, I tried a few random combinations of external hard + 2 internal hard drives and the 4 SATA ports. ArmyRNVetOct 26, 2009, 12:06 AM I just had a devil of a time trying to install a Western Digital 500 GB SATA Hard drive for similar reasons--the drive was recognized in SC decaJan 24, 2010, 3:01 PM Still Nothing guys.............. http://nexwarecorp.com/hard-drive/sabrent-usb-3-0-sata-ide-2-5-3-5-5-25-hard-drive-converter-usb-dsc9.html
The upper one shows you only the devices Windows already knows how to use. Otherwise the BIOS would have issued and error. The first from the Wiki........ It involves using Windows XP to format the drive!
Bootable Add-in Cards CDROM Drives: 1. 1st Master: CR-48xATE / 2. Did you ever find out what your possible problems could be? There, the computer tells me that I have not enough disks for a raid config, but it does list the drive as Sata and tells me its size etc.
For some reason, the SATA power cable were not getting the electric current. That points to 'bad data on the first selected hard disk. Drive was detected by BIOS but not by windows, That led me to this helpful forum. Hard Drive Not Showing Up In Disk Management Please help.
Before, the cd and dvd drives were e: and f:, the hd(when it was recognized) was still g:Not sure why it happened (I might try removing all emulation drives first and Hard Drive Detected In Bios But Won't Boot Adding two PCI PATA adaptors, jumps this to 16 PATA drives. Storage forum About This ForumCNET's Forum on storage is the best source for finding help, troubleshooting, and getting buying advice from a community of experts. http://www.tomshardware.com/forum/244697-32-sata-drive-detected-bios-windows-disk-management Although SATA capable boards DO have channel designation, there is no need to put then in any specific order, I too am having the same problem, but my computer will load
This thread is a bit dated from when I first started it, but since then I ended up upgrading my power supply and haven't had issues anymore. Gpt Vs Mbr If this is the case, get a friend who builds their own computers to take a look at your box and see what she/he says. I have still been unable to recover the lost data, using recovery programs, etc., I think the info is still there, but I'm not going to pay a high price to Other System Info: Its running Windows XP Professional.
If all goes well, NTLDR is loaded and the boot process of the OS actually begins... https://www.cnet.com/forums/discussions/mixing-sata-and-ide-drives-in-a-system-115142/ And so, I finally got the setting I was looking for and I would like to thank you for all your help. Installing Second Sata Hard Drive Without Raid But now I'm stuck with it. How To Connect Two Sata Hard Disk In One Pc New MB's are cheap.
That is what needs to be fixed. this page What puzzles me the most is that it was working after reformatting but somehow I have a feeling it may have updated something or I could have damaged my drive from And does anyone know anything about this ? It could be the brand or the speed of your hard drive. How To Repair Hard Disk Not Detected
Would this explain why the bios sees my sata hard drive as "IDE chanel 3". and i looked every were on line to find info, no luck till i read ur post..... might even use the same PE in Partition Magic. get redirected here Mikenet, Check your BIOS configuration on your 500gig drive (First SATA), as I see from your picture on your 1st post the First SATA is configured as LRG (Large) it should
It simply disappeared that time when my computer froze and I rebooted. Ahci Vs Ide I have a mobo that has four PATA connectors, allowing eight PATA drives. Your troublesome disk should show up there, since the BIOS can see it.
I'll give the fixboot a try, if that doesn't work I'll try the disc wizard tool. There, the computer tells me that I have not enough disks for a raid config, but it does list the drive as Sata and tells me its size etc. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended. Reboot And Select Proper Boot Device If I disconnect the drive the unusually very long pause between windows loading and the welcome screen also doesn't happen.
If this woks I might be able to directly access the data on the 500 gig unbootable drive and then just copy what I need to the 160 gig, if not Does the disk have a letter name assigned to it? I un hooked it and connected VIA USB and the drive was then visiable. http://nexwarecorp.com/hard-drive/why-partition-a-hard-drive-mac.html Can you e-mail me is possible and I will reply?
There Needs to be a closed circuit so u will need something on one of the 12 volt rails that HAS THE ABILITY to run at 12v. xD haha. I do not have any PATA (IDE) hard drives in my computer, just IDE CD or DVD drives. So be sure you have the driver on a floppy and it should have come with your motherboard.
So if your SATA drives have their port modes set in the BIOS to IDE Emulation, Win XP can recognize them and they will show up in Disk Management in the I am wondering whether ti is possible there is a mismatch of first- and second-generation SATA involved. On its left end is a smaller label block with things like "DISK_0", a size, and a few other bits of info. In the new Computer Management window expand "Storage" if necessary and click on Disk Management.
how much ram are you running? And??? There make any changes relating to hard drive configurations such as whether it is a raid setup, SATA, IDE or whatever other options are available. SATA Connectors - These connectors allow you to attach one UDMA 150 hard disk to each connector.
If you do, when you are finished come back here and find the remainder shown as "Unallocated Space". Hmmm, I see messages about the A8nx5 motherboard from 2006, and ASUS site doesn't find that one? SATA1, SATA2, SATA 3 and SATA4 are provided for SATA RAID or standard SATA function. I accept no responsibility for any damage to your hardware as a result of this tip.